Enterasys Networks Wireless Ethernet Adapter I Network Card User Manual


 
Ethernet Adapter Manager Installation 4-19
Network Configuration
Figure 4-7: Network - Basic Tab Page
6) Enter the IP address of the gateway if your network uses a gateway (router or
firewall). You need to enter the IP address of your gateway if you plan to use
the Ethernet Adapter to access computers or other Ethernet Adapter units
beyond your Internet router or firewall. A gateway entry is only needed for
serial applications that actively connect to an IP address outside your local
area network. You may enter “none” in this field if no gateway is present or
a gateway is not needed..
A gateway is not necessary if you are connecting to a wired Ethernet
device.
The Ethernet Adapter does not support DHCP.
NOTES