Filter
Top Products
Ethernet Adapter Manager Installation 4-13
PC Card Configuration
3) Enter the Network Name. The Network Name must match the Access Point,
or match the name to which you will use to establish a Ad-Hoc network. The
Network Name is case sensitive. The Network Name is used to specify a
unique IEEE 802.11 wireless network. Wireless Ethernet Adapters units use
the Network Name to associate to a specific Access Point (AP). Only devices
with the same network name will associate with each other. Alphanumeric
values may be used in this field.
4) Enter the Station Name. The Station Name is an identifier for each Ethernet
Adapter. The value supplied in this field is for convenience in identifying the
Ethernet Adapter units with software, such as the Ethernet Adapter Manager.
5) Select the Network Operation.
a) Select Access Point if your configuration includes Access Points. Select
Ad-hoc if your configuration does not include Access Points.
b) Click on the Update and Reset Unit button. The Ethernet Adapter
Manager Message Log appears with a message stating that the update
was successful.