Filter
Top Products
B-2
Table B-1: Problem Diagnosis
Situation Problem Steps to take
The power light is off
or the power light is
blinking.
The Ethernet Adapter is
not receiving power
properly.
Verify that all physical connec-
tions are securely in place.
Contact Technical Support if the
problem persists.
The power light is on
steady and the status
light is on.
Configuration or
software alert condition
Check the System Event Log to
determine the cause, and refer to
the following Event Log Error
Table.
Radio Association
light is not turning on
and the Status light is
off.
The radio is not linking
to the Access Point.
• Verify that the radio is
supported by the Ethernet
Adapter.
• Verify that the Network
Name is set to match the
Access Point.
• Verify that the radio is fully in
the socket.