Filter
Top Products
Using the Ethernet Adapter Manager
4-6 Ethernet Adapter Manager Installation
Saving a Configuration
You can save the configuration settings of the Ethernet Adapter to a local file. This feature
allows you to restore settings to a known state, or easily configure multiple Ethernet
Adapter units with the same settings.
1) Click on the Update and Reset Unit button. This synchronizes the
parameters in the Ethernet Adapter with those in the Ethernet Adapter
Manager.
2) Go back to the Configuration window (Figure 4-1).
3) Click on the File menu and select Save Configuration.
4) Browse to the directory where you would like to save the current
configuration. The default path is the RoamAbout program directory.
5) Click Open. (In this case the Open button is used to save the file)
Loading a Configuration
The Ethernet Adapter Manager allows you to reload a saved configuration file to a selected
Ethernet Adapter.
1) Go back to the Configuration window (Figure 4-1).
2) Click on the File menu and select Load Configuration.
3) Browse to the directory which contains the saved configuration that you want
to upload.
4) Select the desired configuration file and click on the Open button.
The configuration file parameters are displayed.
5) Go back to the Configuration window (Figure 4-1).
To ensure that you save your changes to a local file and the Ethernet
Adapter, you should always perform Step 1 (Update and Reset Unit) before
saving your configuration.
NOTE