Filter
Top Products
General Serial Configuration 5-3
UART Settings
UART Settings
UART (Universal Asynchronous Receiver/Transmitter) is the fundamental hardware for
serial communication. It controls the speed and method of data transfer of the serial port.
To configure the UART settings, perform the following steps:
1) Clicking on the Serial tab.
2) Click on the UART tab. The UART tab page is shown in Figure 5-2 with the
default settings.
Figure 5-2: Serial - UART Tab Page
3) Select the baud rate of your device from the pull-down menu. The baud rate
indicates the data transfer rate of the serial port. The baud rate ranges from
300 to 115200 bps. Standard rates are 300, 1200, 2400, 9600, 19200, 38400,
57600, 115200.