Filter
Top Products
General Serial Configuration 5-1
Chapter 5
General Serial Configuration
This chapter describes the general serial settings that are required for all serial port
applications. For proper operation, the settings of the Ethernet Adapter always match the
settings of the device to which it is connected via the RS-232 port. There are two groups of
parameters that need to be configured to accomplish this task: the UART Settings and the
Flow Control Settings.
Configuration Flowchart
Figure 5-1 can assist you with the Ethernet Adapter configuration. Start at the top of and
move downward towards the desired configuration. As you move down the flowchart, there
are bulleted lists of configuration parameters that you need to set to accomplish that
configuration. The flow chart only lists the parameters that need to be modified for proper
operation.