Filter
Top Products
Ethernet Adapter Manager Installation 4-17
Configuring the Ethernet Adapter to Connect to a Wired Ethernet Device
Configuring the Ethernet Adapter to Connect to a Wired
Ethernet Device
You can configure the Ethernet Adapter as a wireless device to connect to a wired unit, such
as a computer or Ethernet printer, to your wireless network. The Ethernet Adapter can act
as a wireless device, in addition to performing any one of the serial port applications
discussed in the following chapters.
To configure the Ethernet Adapter to connect to a wired Ethernet device, perform the following
steps:
1) Complete the PC card configuration instructions described in PC Card
Configuration on page 4-12.
2) Click on the Update and Reset Unit button.
3) If necessary, move the Ethernet Adapter to the desired location. Provide
power to the Ethernet Adapter and connect it to the Ethernet device.
Your Ethernet Adapter is now configured to act as a wireless device connected to your
wired Ethernet network component.