Epson 3250 Printer User Manual


 
Printing on Single Sheets
You can load standard-sized single sheets with the paper cassette
and you can load single sheets of paper from 148 mm (5.8 inches) to
257 mm (10.1 inches) wide with the manual insertion slot.
Tips for using the paper cassette
To review the steps for loading paper in the paper cassette, see
“Loading paper into the paper cassette” on page 1-9. The tips below
help you get the best performance when printing with the cassette.
Load paper in the paper cassette before you turn on the printer
and send data. When the printer receives data from the
computer, it loads a single sheet automatically and begins to
print.
If the printer runs out of paper during a print job, reload the
paper cassette and press the
FORM FEED
button to load the
paper.
Press the
FORM FEED
button to eject a sheet of loaded paper.
You can adjust the top-of-form position with the gear under the
printer cover. It is marked by + and - signs. Open the printer
cover and turn the gear to adjust the position. The notches on the
ribbon mask indicate the base line of printed characters. The gear
adjustment affects only the loaded page. If you want to change
the top-of-form position permanently, you can adjust it in the
default-setting mode described in Chapter 3. However, most
application software programs take care of the top and bottom
margins. You usually don’t need to set the top-of-form position
on the printer.
2-2
Paper
Handling