Filter
Top Products
Technical Specifications
Single sheets (Manual insertion):
Width
148 to 257 mm (5.8 to 10.1 inches)
Length
92 to 364 mm (3.6 to 14.3 inches)
Thickness
0.065 to 0.14 mm (0.0026 to 0.0055 inches)
Weight
52 to 90 g/m
2
(14 to 24 lb)
Continuous paper:
Width 101 to 254 mm (4 to 10 inches)
Copies
Two sheets (one original plus one copy)
Thickness
0.065 to 0.18 mm (0.0026 to 0.0071 inches) total
Weight
52 to 82 g/m
2
(14 to 22 lb) for one sheet
40 to 58 g/m
2
(12 to 15 lb) per sheet in multi-part
forms
l
Use only two-part carbonless multi-part forms and
use them only with the optional push tractor.
Note: You can use recycled paper under normal conditions. If you notice
increases in ribbon consumption and paper jamming, use a higher grade of
paper.
Thickness
Weight
Labels:
Size
101 to 254 mm (4 to 10 inches) width for backing
sheet
63.5 x 23.8 mm (2 1/2x 15/16 inches) minimum for a
label
0.07 to 0.09 mm (0.0028 to 0.0035 inches) for backing
sheet
0.16 to 0.19 mm (0.0063 to 0.0075 inches) total
68 g/m
2
(17 lb)
l
Use continuous type labels only with the optional
push tractor.
l
Use labels only under normal temperature and
humidity conditions.
Envelopes:
Size No. 6
No. 10
Thickness
Weight
166 x 92 mm (6.5 x 3.6 inches)
240 x 104 mm (9.4 x 4.1 inches)
0.16 to 0.48 mm (0.0063 to 0.0197 inches)
45 to 75 g/m
2
(12 to 20 lb)
l
Use envelopes only under normal temperature
and humidity conditions.
l
Load envelopes with the longer side inserted into
the rear slot by manual insertion only.
A-4
Appendix