Filter
Top Products
Using the Default-Setting Mode
Your printer comes with a series of internal settings that control a
variety of printer functions, such as page length and top of form
position. Because these settings take effect each time you turn on the
printer, they are called default settings.
The factory default settings are designed to meet the needs of most
users, so you may not need to change them. The table below lists all
the features you can set in the default-setting mode.
Setting
Character table
Options
Non-European version:
437,850,860,863,865
European version:
437,850,860,863,865,437 Greek,
851, 852, 053, 855, 857, 864, 866, 869,
or USSR GOST
Page length
(for continuous paper)
11 in., 12 in., 8.5 in., or 70/6 in. (A4)
Skip-over-perforation On or Off
Tear-off position
On cutter or Above cutter
TOF position
-3, -2, -1, +O, +l, +2, or +3
Graphic print direction Unidirectional or Bidirectional
Download
On or Off
Auto line feed On or Off
Hex dump/demonstration
Hex dump or Demonstration
Note: Most application programs control the printer features
listed here. If you can use your application program to control the
printer, you may never need to use the default-setting mode. In
fact, you may find that your program settings override your
printer’s default settings. See your application program
documentation for more information.
3-6
Using the Printer