Filter
Top Products
3.
Replace the access cover as described in the next section.
The computer automatically detects the coprocessor. When you
turn on the computer, the system configuration screen shows
that a numeric coprocessor is present.
Replacing the Access Cover
After installing a memory module or numeric coprocessor, you
must replace the access cover. Follow these steps:
1.
Turn the computer upside down with the front facing you.
2.
Replace the access cover as shown below. Gently press down
on it until you feet it snap into place.
3.
Turn the computer right side up.
4.
Connect any external devices you are using.
Connecting Optional Devices
5-17