Filter
Top Products
6. Slide the two paper supports so they are spaced evenly
between the two sprockets.
7. Fit the sprocket holes of the paper over the sprocket pins.
If there is slack in the paper or if the holes in the paper do
not align properly with the sprocket pins, pull the paper
slightly and use the pull tractor knob to adjust the position
of the paper as shown below. Slide the knob to the right
first, and then turn it as necessary.
c
Caution:
Be sure the sprockets on the built-in front tractor and
the optional pull tractor are aligned.
D-4-7-B
D-4-8-A
6
R
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
Using Printer Options 6-7