Filter
Top Products
Operation
The Pause light is off but the printer does not print.
Cause What to do
The interface cable is not
plugged in securely.
Confirm that both ends of the cable
between the printer and the computer
are fastened securely. If the cable is
connected correctly, run a self test as
described on page 8-5.
Your interface cable does not
meet the printer and/or
computer specifications.
Use an interface cable that meets the
requirements of both the printer and
computer. See Chapter 1 and your
computer documentation.
Your software is not properly
set up for your printer.
Make sure that your printer is
properly selected in your application
software. If necessary, install or
reinstall the printer driver software as
described in Chapter 2.
The Paper Out and Pause lights are on and the printer does
not print.
Cause What to do
The printer is out of paper for
the specified paper source.
Make sure that paper is loaded in the
printer from the current paper source.
Press the Pause button to resume
printing.
8
Troubleshooting
R
Peony Rev.C
A5 size Chapter 8
98/01/07 DR, pass 4
Troubleshooting 8-13