Filter
Top Products
3. To end the self test, press the Pause button to stop printing.
Tear off the page if necessary, and then turn off the printer.
c
Caution:
Do not turn off the printer while it is printing. Always press
the Pause button to stop printing and then turn off the
printer.
Using the Hex Dump Mode
The printer can print data in hex dump mode, which allows
experienced users to find the cause of communication problems
between the printer and a software program. In hex dump
mode, the printer prints all data received as characters in
hexadecimal values.
To use hex dump mode, follow these steps:
1. Make sure that paper is loaded in the printer.
2. Hold down both the LF/FF Load and Tear Off buttons
while you turn on the printer.
3. Next, run a software program and send a print job to the
printer. Your printer prints all the codes it receives from
the software in hexadecimal format.
dump
L
Peony Rev.C
A5 size Chapter 8
98/01/07 DR, pass 4
8-6
Troubleshooting