Filter
Top Products
When you switch between front and rear tractors, the paper
jams or the printer does not feed the paper back to the standby
position.
Cause What to do
The printer may have reverse
fed too many pages.
Use the tear off feature to tear off the
printed document or any excess paper
so that the printer needs to reverse
feed only one page. Then press the
Front/Rear button to switch tractors.
You may be trying to switch
tractors when labels are
loaded in the printer.
Labels jam when they are fed
backward, so always remove any
labels loaded in the printer before
you switch tractors. To remove labels
loaded in the printer, tear off the fresh
supply below the tractor and press the
LF/FF Load button to eject the
remaining labels.
When you switch between front and rear tractors, the printer
does not load paper onto the selected tractor.
Cause What to do
The printer may be out of
paper.
Load paper onto the tractor. The
tractor arrow on the Tractor Select
indicator should be green.
L
Peony Rev.C
A5 size Chapter 8
98/01/07 DR, pass 4
8-12 Troubleshooting