Filter
Top Products
R The binding area should be flat and should have no creases.
R The sprocket holes of all sheets in the form should be aligned
properly.
R The binding position should be outside the printable area.
Width 101 to 406 mm (4 to 16 inches)
Length/page 101 to 431 mm (4 to 17 inches)
Number of copies
Front 7 sheets (1 original + 6 copies)
Rear 6 sheets (1 original + 5 copies)
Total thickness
Front 0.53 mm (0.021 inch) maximum
Rear 0.46 mm (0.018 inch) maximum
Weight
Single sheets 52.6 to 82.7 g/m
2
(14 to 22 lb)
Multi-part forms 41.4 to 56.4 g/m
2
(11 to 15 lb) (weight/part)
and within the total thickness
Quality Plain paper, recycled paper, and carbonless
Printable area
Note:
Position the sprockets or set your application software so that the printer
does not print outside the printable area.
printable area
printable area
C
C
A
A The minimum top margin
(below the perforation) is
2.6 mm (0.1 inch).
B The minimum bottom margin
(above the perforation) is 4.2 mm
(0.165 inch).
C The minimum left or right margin is
13 mm (0.51 inch).
The maximum printable width is
345.4 mm (13.6 inches).
B
A-2test
L
Peony Rev.C
A5 size Appendix A
98/01/07 pass 4
A-6 Specifications