Filter
Top Products
8. Close the sprocket covers.
9. Adjust the two sprockets until the paper is straight and
smooth, and then lock the sprockets into place.
c
Caution:
Be sure the sprockets are not too far apart. Your paper
could jam if they pull the paper too tightly or tear the
edges of the paper holes. To remove any excess tension in
your paper, release the right sprocket and lock it again.
10. Adjust the top-of-form position as described in Chapter 3,
if necessary.
11. Close the top cover. Press the LF/FF Load button to feed
the paper out the back of the printer. Make sure the edge
of the first sheet emerges below the paper separator.
D-4-8-B
D-4-9
L
Peony Rev.C
A5 size Chapter 6
98/01/07 Pass 4
6-8 Using Printer Options