Filter
Top Products
Printing on Multi-Part Forms and Labels
Your printer can print on both single-sheet and continuous
multi-part forms, as well as on labels.
You can print on various types of paper, including multi-part
forms and labels. Your printer can also handle a variety of
paper thicknesses, from thin paper to seven sheets (or six
sheets on the rear tracor) including the original. The printer
automatically adjusts to the width and thickness of your paper.
When you print on multi-part forms and labels, the positioning
of your text on the page can be critical. For more information
on aligning your text, see the sections on adjusting top-of-form
and printing positions earlier in this chapter. You should also
check both your printer and your software page length settings
before you load labels or forms.
If you are using multi-part forms or labels, you may want to
use the optional pull tractor. See Chapter 6.
c
Caution:
When printing on labels, be absolutely sure that your printing
stays within the printable area of the label to prevent damage
to the print head. For more information on the printable area,
see Appendix A.
3
R
Peony Rev.C
A5 size Chapter 3
98/01/07 Pass 4
Paper Handling
3-31