Filter
Top Products
Options and Consumables 135
6
6
6
6
6
6
6
6
6
6
6
6
4. For LX-300+II users, make sure that the print head is in the
middle of the printer.
For LX-1170II users, make sure that the print head is in
position at 10 cm (4 inches) from the left side.
(If it is not, turn on the printer, and then, turn off the printer.)
Then remove the ribbon cartridge from the printer.
5. Remove the new ribbon cartridge from its package.
6. Turn the ribbon-tightening knob in the direction of the arrow
to remove any slack from the ribbon so it is easier to install.
7. Insert the ribbon cartridge into the printer as shown; then
press both sides of the cartridge firmly to fit the plastic hooks
into the printer slots.