Filter
Top Products
Paper Handling 19
2
2
2
2
2
2
2
2
2
2
2
2
3. Slide the left sprocket unit using the scale on the printer as a
guide. The printer prints to the right of the position marked
0. Push the sprocket lock lever back to lock it in place. Then
slide the right sprocket unit to match the width of your paper,
but do not lock it. Move the paper support so it is midway
between the sprocket units.
4. Make sure your paper has a clean, straight leading edge. Open
the sprocket covers. Fit the first holes of the paper over the
sprocket pins and then close the sprocket covers. Slide the
right sprocket unit to remove any slack in the paper and lock
it in place. Now the paper is in the paper-park position.
c
Caution:
Use the paper feed knob on the right side of the printer only
to clear paper jams and only when the printer is turned off.
Otherwise, you may damage the printer or cause it to lose the
top-of-form position.