Filter
Top Products
42 Projecting
Adjusting the Image
Once you see your image, you need to make certain adjustments:
■ To focus or zoom your image, see below.
■ If the image is too high or too low, you can reposition it. See
page 43.
■ If the image isn’t square, see page 44.
■ If a computer image displays incorrectly, see page 47.
If you need to fine-tune the image and/or sound, see Chapter 4.
Focusing and Zooming Your Image
Use the Focus ring on the projector to sharpen the image.
Use the
Zoom ring on the projector to reduce or enlarge the image.
Move the tab toward the
W to increase the size, and toward the T to
decrease it.
If the image still isn’t large enough, you may need to move the
projector farther away from the screen. You can also use the
E-Zoom
buttons on the remote control to zoom in on a portion of the image.
See page 57 for instructions.
Focus ring Zoom ring