Filter
Top Products
Managing the Projector from a Remote Computer 87
2. Click Install to install both EMP Monitor and EMP Network
Manager.
3. Follow the on-screen instructions to install the software.
4. When you’re finished, click
Exit.
Once installed, you can access these programs from your computer’s
Start menu.
Connecting and Configuring the
Projector
Before using the Easy Management software to manage your
projector(s), you have to connect each projector you want to monitor
to your network and configure it with an appropriate IP address.
1. Connect the projector to your network using a commercially
available 100baseTX or 10baseT network cable.
Connect the cable to the Ethernet port on the projector as shown.
2. Turn on the projector (see page 36).
note
If you don’t want to install
both programs, click
Custom, select the program
you want to install on the
next screen, and click
Install.
If you need to uninstall
the software, use the
Add/Remove Programs
utility in the Windows
Control Panel.
Ethernet port