Filter
Top Products
Managing the Projector from a Remote Computer 97
3. Enter the projector’s IP address and click Add. The projector’s
icon is added to the EMP NetworkManager screen.
4. Click
Connect to connect the projector to the network.
Setting a Password
You can set a password to restrict access to each projector from EMP
NetworkManager:
1. Right-click the icon of the projector whose password you want to
set, then select
Change Password.
2. Enter a password up to 14 characters in length.
Creating the E-Mail Settings
1. If EMP NetworkManager is not already running, open it from
the Start menu.
You see your registered projectors displayed as shown:
2. Double-click the icon for the projector whose e-mail settings you
want to create. Enter your password, if you created one (see
above).