Filter
Top Products
Managing the Projector from a Remote Computer 91
2. Click Register projector as shown.
You see this screen:
3. Click
Auto detect to locate projectors currently operating on the
network. Or click
Manual registration and enter the projector’s
name and network address.
Any projectors found on the network are listed as shown below:
4. Select each projector you want to add by clicking its name, then
clicking the
Add button. When you’re done adding projectors,
click
Close.
Click here
note
If Auto detect fails to find
the projector, your projector
may not be connected or
configured correctly for the
network. See page 87.
Click here