Filter
Top Products
Using the Remote Control 55
Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, display a picture-in-picture image, and adjust
the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
■ On the projector’s control panel, there are two Source buttons:
Press the
Computer/DVI button to switch between equipment
connected to the
Computer and DVI ports. Or press the
Video/BNC button to switch between equipment connected to
the
Video, S-Video, and BNC ports.
■ On the remote control, there are six Source buttons. Use them to
switch between equipment connected to the port identified on
each button. (The
EasyMP button is not functional with the
PowerLite 7900p.)
After you select a source, the screen goes dark for a moment before the
image appears.
note
You can use the projector’s
menus to fine-tune the
picture and sound quality as
described in Chapter 4.
Source buttons