Filter
Top Products
Setting Up the Projector
11
If you place the projector below the level of the screen, you’ll have to
tilt it up by extending the feet as shown. Tilting the projector upward
causes the image to lose its square shape, but you can correct the
distortion by pressing the
Keystone
button as described in the next
chapter.
If you place the projector level with the bottom of the screen, the
image will be square and you won’t have to adjust it. If you place the
projector higher than the bottom of the screen, the image will still be
square, but you won’t be able to fill the whole screen with the image.
ideal
height
note
A
fter positioning the
p
rojector, you may want to
connect a Kensington
M
icroSaver
®
anti-theft
device to the lock port on the
p
rojector’s left side. You can
p
urchase this from EPSON;
see “Optional Accessories” on
p
age 7
.
600-811-820.book Page 11 Tuesday, April 30, 2002 10:17 AM