Filter
Top Products
76
Solving Problems
■
You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
The image isn’t square, but trapezoid-shaped.
■
If you’ve tilted the projector upward by extending the legs, the
image will be broader at the top. Hold down the or
button on top of the projector until the image is square.
■
If the projector isn’t directly in front of the screen, facing the
screen squarely, the image will be broader at the left or right side.
Hold down the or button on top of the projector until the
image is square.
The image contains static or noise.
■
Make sure the
Comp1 Input
and
Comp2/ YCbCr
options in the
Setting menu are correct. See page 56.
■
If you’re using a computer cable longer than 6 feet (2 meters), or
an extension cable, the image quality may be reduced.
■
Keep your computer and video cables away from the power cord
as much as possible to prevent interference.
■
The video signal may be split between the computer and the
projector. If you notice a decline in the projected image quality
when the image is displayed simultaneously on your laptop
computer and the projector, turn off the laptop’s LCD display.
The image is blurry.
■
There may be dirt or smears on the lens. Clean the lens as
described on page 62.
■
Adjust the focus using the focus ring.
■
Make sure the lens is not fogged by condensation. You may need
to wait before using the projector after moving it from a cold
environment to a warm environment.
600-811-820.book Page 76 Tuesday, April 30, 2002 10:17 AM