Filter
Top Products
86
Appendix A: Connecting to Additional Equipment
Connecting the Mouse Cable
To use the remote control as a mouse, follow the steps below. You’ll
use a different mouse cable, depending on whether your computer has
a round PS/2 mouse port or a flat USB port.
The USB cable also provides audio support. If your computer
supports USB and your presentation includes sound, you can play it
through the projector’s speakers by connecting the USB cable.
1. Connect the square end of the USB cable to the projector’s USB
port as shown.
2. Disconnect your mouse from the port on the back of your
computer and replace it with the other end of the cable. (Your
computer’s mouse will be disabled while you are using the remote
control as a mouse.)
note
If you have a PC with a
serial mouse port, you’ll need
a serial mouse cable. See your
projector dealer to obtain the
correct cable.
USB cable
USB port
600-811-820.book Page 86 Tuesday, April 30, 2002 10:17 AM