Filter
Top Products
Using the Projector
29
Controlling the Projector
While giving your presentation, you may want to switch between
picture sources, adjust the volume, or temporarily turn off the picture
and sound. Follow the instructions below to access theses features
from your projector’s control panel. You can also access these features,
plus many others, using the remote control as described in Chapter 3.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can use the buttons on the control panel (or remote
control) to switch between the different sources.
On the projector’s control panel, press the
Computer/YCbCr
button
to switch between computer sources and component video. Press the
Video
button to switch between standard (composite) video and
S-Video.
After you select a source, the screen goes dark for a moment before the
image appears.
Adjusting the Volume
If your presentation includes sound, you can adjust the volume from
the projector’s control panel.
■
To increase the volume, press on the right side of the
Volume
button.
■
To reduce the volume, press on the left side of the
Volume
button.
Power
Sync+
Tracking - Tracking +
Menu Esc
Help
Computer/YCbCr
Video
Auto
Source
A/V Mute
button
600-811-820.book Page 29 Tuesday, April 30, 2002 10:17 AM