Filter
Top Products
50
Fine-tuning the Projector
Saving and Recalling Computer Settings
When you are projecting from an analog computer source, you can
save and recall settings (resolution, tracking, sync signal, and position)
in up to five different combinations. This is useful if you use more
than one computer with the projector; you can save the settings for
each one and recall them when necessary. Follow these steps to save
the projector’s current settings:
1. Press the
Menu
button to display the Main menu.
2. Press the button to select the Video menu.
3. Use the
Sync–
button (control panel) or the button
(remote control) to move down to the
Preset
option.
4. Press . You see the Preset Selection menu with the current
resolution setting displayed.
5. Use the
Sync–
button (control panel) or the button
(remote control) to select the number to which you want to assign
the current settings.
6. Press . If you see an
Overwrite?
prompt, select
Yes
and
press .
7. Press
Esc
or
Menu
to exit.
When you want to use a saved setting, press the
Preset
button on the
remote control. You see the selected setting displayed on the screen.
To select another number, press the
Preset
button again until the
setting number you want is displayed. The projector resets itself
according to the selected setting.
600-811-820.book Page 50 Tuesday, April 30, 2002 10:17 AM