Filter
Top Products
Fine-tuning the Projector
55
Customizing Projector Features
You can use the Setting menu to disable the projector’s sleep mode,
adjust the image shape, and customize several other features.
1. Press the
Menu
button.
2. Use the
Sync–
button (control panel) or the button
(remote control) to highlight
Setting
. You see the options and
their settings on the right side:
3. Press to select the Setting menu.
4. Use the
Tracking
and
Sync
buttons (control panel) or
the button (remote control) to set the following options:
■
V-Keystone or H-Keystone
Correct the shape of the image. Keystone correction makes
the image smaller, especially if you use both vertical
(
V-Keystone
) and horizontal (
H-Keystone
) correction. If
you need to adjust the shape in both directions, adjust the
vertical first. If the image looks uneven after you adjust the
shape, decrease the Sharpness setting (see page 49).
■
P in P
Selects the source used by the picture-in-picture display
(standard composite video or S-Video).
■
No-Signal Msg.
Selects a screen color or image to display when the projector is
not receiving a signal. The logo setting displays an image that
you have transferred to the projector (see page 53).
600-811-820.book Page 55 Tuesday, April 30, 2002 10:17 AM