Filter
Top Products
Appendix A: Connecting to Additional Equipment
93
Connecting to a High-End Workstation
There is no across-the-board standard for workstation video output.
However, your PowerLite projector is capable of remapping input
resolutions up to 1600
×
1200 pixels. Workstations that follow the
SXGA standard and use the HD15 (standard VGA) connector won’t
need an adapter cable or any special connection device. If your system
varies, contact your computer dealer for help in connecting your
workstation.
Connecting to a DVI Video Source
The projector’s DVI (Digital Visual Interface) port receives pictures
directly from your computer in digital format. This lets the projector
display images of greater clarity than can be achieved using a standard
analog VGA connection.
To project images in digital video format, follow these steps:
1. Connect the computer’s DVI cable to the projector’s
Computer1
port.
2. To display images properly, make sure the
Comp1 Input
option
in the projector’s Setting menu is set correctly. See page 56 for
instructions.
If you want to connect audio for this computer, use the projector’s
Audio 1
port; if you want to connect a mouse cable (to use the remote
control as a wireless mouse), use the
Mouse
or
USB
port.
Computer1 port
600-811-820.book Page 93 Tuesday, April 30, 2002 10:17 AM