Filter
Top Products
Fine-tuning the Projector
49
■
Tint (NTSC video only)
Adjusts the balance of green to magenta in the image.
■
Sharpness
Adjusts the sharpness of the image.
■
Color Mode
Corrects the vividness of image color. You can select from the
following six settings, and save a different one for each
computer and/or video source:
sRGB
: To use the sRGB standard for computer displays (the
default when projecting from a computer with analog video)
High Brightness:
For presentations in bright rooms
Meeting:
For projecting without color enhancement
Presentation:
For presentations in dark rooms
Theater:
For optimizing movie images with natural color
(the default for video or S-Video display)
Amusement:
For optimizing games
■
Resolution (analog computer images only)
Leave this setting at
Auto
to allow the projector to detect the
video signal automatically. If the projector is unable to sync
up with the computer, select
Manual
and choose one of the
settings.
■
Video Signal (video only)
Leave this setting at
Auto
unless you are using a 60-hertz PAL
system (select
PAL60
).
■
Noise Reduction (video only)
Reduces visual “noise.” This is especially useful when text and
video images are combined, as in movies with subtitles.
4. When the image is set correctly, press
Esc
or
Menu
. Your settings
are automatically saved.
600-811-820.book Page 49 Tuesday, April 30, 2002 10:17 AM