Filter
Top Products
EPSON Stylus C63/64/83/84 Revision A
Disassembly and Assembly Disassembly 16
A D J U S T M E N T
R E Q U I R E D
o When replacing the Main board with new one, perform the
following service items.
n If the read-out operation succeeds by adjustment
program from defective main board, replace with new
board and write the read out data to new one.
1) Ink consumption counter
2) Waste drain ink pad counter
3) Head ID
4) Bi-d adjustment
5) Top margin adjustment
6) 1st dot position adjustment
7) PW adjustment (Only for SC83/84)
8) USB ID
9) Market ID
10) Head angular adjusstment
11) PF adjustmen
12) CR motor drive torque dispersion measurement
n If the read-out operation is not able to succeed by
adjustment program from defective main board,
perform the following service items after replacing main
board with new one.
1) Replace all ink cartridges with brand-new one for
Ink consumption counter.
2) Replace the Waste drain ink pad with new one for
Waste drain ink pad counter.
3) Input Head ID
4) Adjust Bi-D alignment
5) Adjust Top margin
6) Adjust 1st dot position
7) Adjust PW adjustment
8) Input the serial number for USB ID
9) Input EEPROM initial setting value for Market ID
10) Adjust Head angular
11) Adjust PF (Paper feed amount)
12) Input max. value of CR motor drive torque
dispersion value