Getting the Most From Your Scanner 37
Using Dust Removal
You can use the Dust Removal feature to digitally remove unwanted specks of dust
from photos or from film (if you have the optional TPU). This feature works in both
Home and Professional Mode, but Professional Mode lets you control the level of
correction you want to apply.
1. Before scanning, make sure the document table is clean and remove as much dust
as possible from your photos.
2. Preview your image, then marquee-select the area you want to scan.
3. In Home Mode select Dust Removal in the Image Adjustments section. In
Professional Mode, scroll down to the Adjustments section of the screen and then
select Dust Removal as shown:
4. In Professional Mode, click (Windows) or (Macintosh) and then choose a
Level to increase or decrease the effect.
Note: You cannot see the results of using Dust Removal on the preview screen. Check
your results on the scanned image.
Before After