Epson 10000XL Scanner User Manual


 
86 Requirements and Notices
Macintosh
Macintosh PowerPC
®
or Intel
®
Core
processor (500 MHz or faster recommended)
OS X 10.2.8, 10.3.9 to 10.4.x
Note: Check the Apple website for any updates to your operating system. Fast User
Switching is not supported for Mac
®
OS X 10.3 and above.
USB (1.1 or 2.0) or IEEE 1394 (FireWire) port. To use the scanner’s optional network card, your
computer must be connected to an existing network using TCP/IP.
IEEE 1394 requires IEEE1394a-2000 compatible and OHCI-compliant interface card
128MB RAM (512MB RAM recommended)
300MB available hard disk space
CD-ROM drive
VGA color monitor with 800 × 600 screen resolution (1024 × 768 or higher recommended)
16-bit 65K-color display adapter card (24-bit display adapter card with millions of colors
recommended)
Important Safety Instructions
Read all of these instructions and save them for later reference. Follow all warnings and instructions
marked on the scanner.
Unplug the scanner before cleaning. Clean with a damp cloth only. Don’t spill liquid on the
scanner. Use a soft, dry cloth or a compressed air spray designed for cleaning electronic equipment
to clean dust from the document table glass.
Do not place the scanner on an unstable surface or near a radiator or heat source.
Use only the power cord that comes with this product. Use of another cord may result in fire or
electric shock.
This product’s power cord is for use with this product only. Use with other equipment may result
in fire or electric shock.
Use only the type of power source indicated on the scanner’s label, and always supply power
directly from a standard domestic electric outlet with a power cord that meets the relevant local
safety standards.
Connect all equipment to properly grounded power outlets. Avoid using outlets on the same
circuit as photocopiers or air control systems that regularly switch on and off.
Do not let the power cord become damaged or frayed.