Filter
Top Products
58 Using Optional Equipment
Loading Pages in the Automatic Document Feeder
The ADF can hold up to 100 pieces of paper, based on a paper weight of 55 g/m
2
,
up to a total thickness of about 1/2 inch (12 mm). If you’re using 20 pound bond
paper, it’s somewhat thicker and heavier (75 g/m
2
), so you won’t be able to load quite
as many sheets. Use the marking on the side of the tray as a guide, as shown:
The ADF accepts the following sizes of paper, in weights from about 13 to 34 pounds
letter-size (50 to 127 g/m
2
):
Before loading the ADF, make sure the document:
■ Has no wet ink on it.
■ Has no holes or no cut-out areas.
■ Is not ripped or wrinkled.
■ Has no staples or other objects attached that may damage the feeder.
■ Has no folds near the edge (within 1/4 inch of the edge).
■ Is not a multipart form.
■ Is not bound.
■ Has no carbon coating.
U.S. paper sizes International paper sizes
Ledger or tabloid (11 × 17 inch)
Legal (8.5 × 14 inch)
Letter (8.5 × 11 inch)
Executive (7.5 × 10 inch)
A3 (297 × 420 mm)
B4 (250 × 353 mm)
A4 (210 × 297 mm)
B5 (176 × 250 mm)
A5 (148 × 210 mm)
Do not load paper above
the top line