Filter
Top Products
Vertical tabbing
VT
Tab Vertically
Format:
ASCII code: VT
Decimal:
11
Hexadecimal: OB
Comments:
Advances the paper to the next tab setting in
the
channel selected by
ESC /. If
no
channel has been selected, channel 0 is used. If no vertical
tabs have been selected, the paper advances one line.
ESC B
Set Vertical Tabs
Format:
ASCII code:
ESC B nl n2 ... 0
Decimal:
27 66 nl n2 ... 0
Hexadecimal: 1B 42 nl n2 ... 00
Comments:
Sets up to
16
vertical tabs in the current line spacing. Tab settings are
not affected by subsequent changes in line spacing. The tab settings are
entered as
n1,
n2, etc., all from
1
to 255, in ascending order. The 0
character indicates the end of the command. All settings are stored in
channel 0 (see ESC b). ESC B 0 clears the tab settings.
ESC b
Set Vertical Tabs in Channels
Format:
ASCII code:
ESC b c nl n2 ... 0
Decimal:
27 98 c nl n2 ... 0
Hexadecimal: 1B 62 c nl n2 ... 00
Comments:
Functions the same as
ESC
B, except that the variable c selects a
channel for the vertical tabs, which must be between 0 to 7. Therefore,
up to eight sets of vertical tabs can be set. The channels are selected by
ESC /.
To
clear the tabs in channel c use ESC b c 0.
8-18
Command Summary