Filter
Top Products
Word Processing
ESC a
Select Justification
Format:
ASCII code:
ESC
n
Decimal:
27 97 n
Hexadecimal: 1B 61 n
Comments:
The following values can be used for
n:
0:
Selects left justification.
1:
Selects
centering.
2:
Selects right justification.
3:
Selects full justification.
The default setting is
n
=
0.
Full justification (n = 3) is performed
when the buffer becomes full. The commands HT and BS are invalid
except in n = 0 mode. For n
= 3 there must be no carriage returns
within a paragraph. This command is available in both draft and
MQ.
ESC
SP (space)
Set Intercharacter Space
Format:
ASCII code:
ESC SP n
Decimal:
27 32 n
Hexadecimal: 1B 20 n
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the character.
The number of units of space is equal to
n,
which should be from
0 to
127.
Each unit of space is 1/120th of an inch. This command is
available in both draft and NLQ.
8-32
Command Summary