Filter
Top Products
If the platen (black roller) turns but the sheet does not load, remove the
sheet completely from
the
printer. Then make sure the paper release lever
is pushed back. Press the paper a bit more firmly into place and try
again.
To eject the paper, press the
ON LINE
button to take the printer off line,
and press
the LOAD/EJECT
button.
Reloading during printing
When you print a document more than one page long using single
sheet
paper, the printer stops printing when it reaches the bottom of the paper
and ejects the page. When this happens, either the
ON LINE
light goes off
automatically or it may remain on, depending on your application
software. If the
ON LINE
light remains on,
the first
thing you should do is
press the
ON LINE
button to take the printer off line.
Once the ON LINE
light is off, remove the
sheet
that has just been printed and load a new
sheet as before. Press
ON LINE to
start printing the next page.
Using Continuous Paper
The tractor built into the FX is remarkably easy to load and operate. Its
low-profile design takes up little space and can handle a wide variety of
paper widths.
To load continuous paper, follow these steps:
1. Turn off the printer.
2. Pull the paper release lever forward to the continuous paper position.
2-4
Paper Handling