Filter
Top Products
International character set
Selecting an international character set provides you with the characters
used in other languages. To obtain the desired international character set,
set switches l-6, l-7, and l-8 according to the DIP switch table on page
3-7. The following table shows the characters that differ in each
international character set.
International character sets
35 36 64 91 92 93 94 96 123 124 125 126
0
USA
1 France
2 Germany
3
UK
4 Denmark I
5
Sweden
6
Italy
7 Spain I
8 Japan
9
Norway
10 Denmark II
11 Spain II
12 Latin America
The countries numbered 8 through 12 are available only through the
ESC R software command. See the Command Summary in Chapter 8.
Also, in IBM emulation mode (DIP switch
l-4
on), a character set
containing international characters (CG character table
2)
is selected
whenever any one of DIP switches
l-6, l-7,
or
l-8
is set to off. If all three
switches are on, CG character table
1
is selected. See Appendix B.
Page length
When DIP switch
2-l
is on, the page length is set to
12
inches. When
it is off, the page length is
11
inches. Other page lengths can be set with
the ESC C and ESC CO commands. See the Command Summary in
Chapter 8.
Using the Printer
3-9