Filter
Top Products
Using the FX with Application Programs
Now that you’ve set up and tested the printer, you need to start using it
with your application programs.
Most application programs let you specify the type of printer you’re
using so that the program can take full advantage of the printer’s
features. Many programs provide an installation or setup procedure that
presents a list of printers to choose from. If your application program
has a printer selection menu, use the instructions below.
Using printer selection menus
If your software has a printer selection menu, simply choose FX-850 or
FX-1050. If the menu does not list either of these printers, choose
one of
the following. They are listed in order of preference.
FX-850
FX-86e
EX-800
FX-85
FX-80 +
FX-80
FX
LX
MX
Epson printer
Draft printer
Ix-1050
FX-286e
EX-1000
FX-286
FX-185
FX-100 +
FX-100
FX
LX
MX
Epson printer
Draft printer
If you plan to use the IBM emulation mode, choose IBM Proprinter (if
you have an FX-850), IBM Proprinter
XL
(if you have an FX-1050), IBM
Graphics printer, or IBM printer, in that order of preference.
Note:
If your application program does not list the
FX-850 or FX-1050,
you may want to contact the
software
manufacturer to see if an
update is available.
4-2
Using Software and Graphics