Filter
Top Products
Character Sets
ESC
t
Format:
ASCII code:
ESC t n
Decimal:
27
116 n
Hexadecimal: 1B 74 n
Select Character Table
Comments:
The following values can be used for n:
0: Selects italic character set.
1:
Selects Epson Extended Graphics character set.
Selects the character table used by ASCII codes
128
through 255.
Selecting Epson Extended Graphics does not disable italic printing.
Italic printing can still be selected by ESC 4. Duplicates and overrides
the function of DIP switch l-3. Note that the value of n must equal
00
hex or
01
hex; the
characters
“0” and
"1"
cannot be used. See
Appendix B for the character tables.
ESC 4
Select Italic Mode
Format:
ASCII code:
ESC 4
Decimal:
27 52
Hexadecimal: 1B 34
Comments:
Causes characters from the italic character set to be printed.
This command is valid even if the Epson Extended Graphics character
set has been selected by ESC t or the DIP switch
l-3,
but character
graphics cannot be italicized. This command is available in both draft
and NLQ.
Command Summary
8-33