Filter
Top Products
6-4
Troubleshooting
Display
indication
Error Action
Printer internal
adjustments.
Turn the printer off. After a
few seconds, turn it on again.
If the error is not cleared,
contact your dealer.
System error. Turn the printer off. After a
few seconds, turn it on again.
If the error is not cleared,
contact your dealer.
The Input switch is
not properly set.
Turn the printer off and set the
Input switch to the INT side.
Turn the printer on and try
printing a photograph.
The black ink
cartridge is not
installed or it is
empty.
Install a cartridge or replace
the old one with a new one
(S020093).
See “Replacing Ink
Cartridges” on page 5-2.
The color ink
cartridge is not
installed or it is
empty.
Install a cartridge or replace
the old one with a new one
(S020110).
See “Replacing Ink
Cartridges” on page 5-2.
Paper has
jammed inside
the printer or it is
not loaded.
Open the printer cover and
remove the jammed paper.
Load the paper properly in
the sheet feeder and press
the
E
Load/Eject button.
Paper has
jammed inside
the printer.
Open the printer cover and
remove the jammed paper.
The ink cartridge
is not installed
properly.
Check the ink cartridge and
install it properly.
See “Replacing Ink
Cartridges” on page 5-2.