Filter
Top Products
36
example, if the Router’s MAC address is 00-01-02-33-44-55, the configuration backup file
should be “000102334455.hex”.
5. On the computer, run a Web browser and click the General, Firmware Tools hyperlink.
6. Within the Configuration Backup/Restore section, specify the IP address of the computer,
which acts as a TFTP server. If you don’t know the IP address of the computer, open a Com-
mand Prompt, and type IpConfig, then press the Enter key.
7. Trigger the restoring process by clicking Restore. The Router will then download the configura-
tion backup file from the TFTP server.
NOTE:
Make sure the file is a valid configuration backup file for the access Router.
2.10.3.5. Resetting Configuration to Factory Defaults
Fig. 54. Configuration reset.
Clicking the Reset button resets the device configuration to factory defaults.
WARNING:
Clicking the Reset button will lose all your current configuration settings.
2.10.4. Setting Time Zone
Fig. 55. Time zone and time server settings.
The IWE3200-H supports absolute system time by querying the SNTP (Simple Network Time Pro-
tocol) time server specified by the Time server setting. And you should specify the Time zone ac-
cording to where you are.
2.11. Configuring TCP/IP Related Settings
2.11.1. Address
The addressing settings depend on the operational mode of the IWE3200-H. Each operational mode
requires different addressing settings.