Epson IWE3200-H Network Router User Manual


 
70
Find out the answer on the start page of the Web-Based Network Manager.
Is the NAT server functionality of the IWE3200-H enabled?
Find out the answer on the start page of the Web-Based Network Manager.
If you cannot find any incorrect settings of the IWE3200-H, the default Router of the
IWE3200-H may be really down or there are other communication problems on the net-
work backbone.
z The DNS server(s) of the IWE3200-H do not respond to ping from the client com-
puter.
Solve the preceding problems first.
If you cannot find any incorrect settings of the IWE3200-H, the default Router of the
IWE3200-H may be really down or there are other communication problems on the net-
work backbone.
z Cannot access the Internet.
Solve the preceding problems first.
Make sure there are no incorrect packet filter settings that would block the traffic from the
local computer to the Internet. In case you are not sure, the last resort may be resetting the
configuration settings of the IWE3200-H to default values by press the Default or
Soft-Reset switch.
B-2: Wireless Settings Problems
z The wireless client computer cannot associate with an IWE3200-H.
Is the wireless client set in infrastructure mode?
Check the operating mode of the WLAN NIC.
Is the SSID of the WLAN NIC identical to that of the prospective IWE3200-H?
Check the SSID setting of the WLAN NIC and of the IWE3200-H.
Is the WEP functionality of the prospective IWE3200-H enabled?
Make appropriate WEP settings of the client computer to match those of the
IWE3200-H.
Is the prospective IWE3200-H within range of wireless communication?
Check the signal strength and link quality sensed by the WLAN NIC.