Filter
Top Products
The Cut Sheet Feeder
5. Push the paper set lever back until it clicks into place and
clamps the paper against the guide rollers. The lever will not
close completely if too much paper is used. If this happens,
remove some paper from the stack and try again.
Envelope
Envelopes are loaded in much the same way as regular paper.
load envelopes, you need to do the following:
To
1. Set the paper thickness lever to match the thickness of your
envelopes.
2. Follow steps 1 through 5 of the paper loading section to load
envelopes.
3.
Push down on the two front levers until they lock into position.
7-10