Filter
Top Products
Switching Between Continuous and
Single Sheets
2.
Press the
LOAD/EJECT
button to feed the continuous paper
backward out of the printer and into a standby position. The
paper is still attached to the tractor, but no longer in the paper
path. The
PAPER OUT
light comes on when the paper is
completely out of the paper path.
A
Pressing the
LOAD/EJECT
button once may not feed the
1
paper back enough to reach a standby position. If the
.
PAPER OUT
light does not come on, you need to press
the
LOAD/EJECT
button again. With normal width continuous
paper, you can press the
LOAD/EJECT
button up to three
times. If, however, you are using narrow paper (between 4
and 6 inches) you should only press the
LOAD/EJECT
button once. Also, do not use this button to eject labels.
3.
Push
the
paper release lever back to the single sheet
position.
2-13