Filter
Top Products
The Pull Tractor
14. Re-install the paper guide; then slide the edge guides together so
they meet at about the middle of the paper’s width.
15. Install the pull tractor cover as shown below.
16. Press the
ON LINE
button to set the printer on line. Now you are
ready to begin printing.
When you are finished printing
The short tear-off function cannot be used with the pull tractor.
If you want to tear off the last printed page at its perforation, press
the
ON LINE
button to set the printer off line and press the
FORM
FEED button to feed the paper forward an additional page before
tearing off the paper.
Using the pull tractor alone
If you wish, you can use the pull tractor without using the push
tractor. If you choose to do this, feed the paper from the rear above
the metal guide and then load it. Be sure to pull the paper release
lever forward to the continuous paper position after you load the
paper.
7-22