Filter
Top Products
Word Processing
ESC a
Select Justification
Format:
ASCII code:
ESC
n
Decimal:
27
9;
n
Hexadecimal: 1B 61 n
Comments:
The following values can be used for n:
0: Selects left justification.
1: Selects
centering.
2: Selects right justification.
3: Selects full justification.
The default setting is
n
= 0. Full justification (n = 3) is
performed when the buffer becomes full; HT BS and spacing
commands should not be used with justification. For n = 3 there
must be no carriage returns within a paragraph.
ESC SP (space)
Set Intercharacter Space
Format:
ASCII code: ESC SP
n
Decimal:
27 32 n
Hexadecimal: 1B 20 n
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the
character. The number of dots is determined by n, which should
be from 0-127. Each unit of space is 1/120th of an inch in draft
and 1/180th of an inch in Letter Quality and proportional.
Double-wide doubles the unit of space.
9-31